Two basic technologies in mobile phones, CDMA and GSM represent a gap you can’t cross. They’re the reason you can’t use AT&T phones on Verizon’s network and vice versa. But what does CDMA vs. GSM really mean for you?
CDMA (Code Division Multiple Access) and GSM (Global System for Mobiles) are shorthand for the two major radio systems used in cell phones. Both acronyms tend to group together a bunch of technologies run by the same entities. In this story, I’ll try to explain who uses which technology and what the real differences are.
Which Carries are CDMA? Which are GSM?
That means we’re mostly a CDMA country. It also means we’re not part of the norm, because most of the world is GSM. The global spread of GSM came about because in 1987, Europe mandated the technology by law, and because GSM comes from an industry consortium. What we call CDMA, by and large, is owned by chipmaker Qualcomm. This made it less expensive for third parties to build GSM equipment.
There are several variants and options carriers can choose, like toppings on their technological ice cream. In this story we’ll be talking about U.S. networks.
What CDMA vs. GSM Means to You
It’s much easier to swap phones on GSM networks, because GSM carriers put customer information on a removable SIM card. Take the card out, put it in a different phone, and the new phone now has your number. What’s more, to be considered GSM, a carrier must accept any GSM-compliant phone. So the GSM carriers don’t have total control of the phone you’re using.
That’s not the case with CDMA. In the U.S., CDMA carriers use network-based white lists to verify their subscribers. That means you can only switch phones with your carrier’s permission, and a carrier doesn’t have to accept any particular phone onto its network. It could, but typically, U.S. carriers choose not to.
In other words, you can take an unlocked AT&T phone over to T-Mobile (although its 3G may not work well because the frequency bands are different). You can’t take a Verizon phone over to Sprint, because Sprint’s network rejects non-Sprint phones.
3G CDMA networks (known as “EV-DO” or “Evolution Data Optimized”) also, generally, can’t make voice calls and transmit data at the same time. Once more, that’s an available option (known as “SV-DO” for “Simultaneous Voice and Data Optimization”), but one that U.S. carriers haven’t adopted for their networks and phones.
On the other hand, all 3G GSM networks have simultaneous voice and data, because it’s a required part of the spec. (3G GSM is also actually a type of CDMA. I’ll explain that later.)
So why did so many U.S. carriers go with CDMA? Timing. When Verizon’s predecessors and Sprint switched from analog to digital in 1995 and 1996, CDMA was the newest, hottest, fastest technology. It offered more capacity, better call quality and more potential than the GSM of the day. GSM caught up, but by then those carriers’ paths were set.
It’s possible to switch from CDMA to GSM. Two carriers in Canada have done it, to get access to the wider variety of off-the-shelf GSM phones. But Verizon and Sprint are big enough that they can get custom phones built for them, so they don’t see the need to waste money switching 3G technologies when they could be building out their 4G networks.
The Technology Behind CDMA vs. GSM
GSM came first. It’s a “time division” system. Calls take turns. Your voice is transformed into digital data, which is given a channel and a time slot, so three calls on one channel look like this: 123123123123. On the other end, the receiver listens only to the assigned time slot and pieces the call back together.
The pulsing of the time division signal created the notorious “GSM buzz,” a buzzing sound whenever you put a GSM phone near a speaker. That’s mostly gone now, because 3G GSM (as I explain later) isn’t a time division technology.
CDMA required a bit more processing power. It’s a “code division” system. Every call’s data is encoded with a unique key, then the calls are all transmitted at once; if you have calls 1, 2, and 3 in a channel, the channel would just say 66666666. The receivers each have the unique key to “divide” the combined signal into its individual calls.
Code division turned out to be a more powerful and flexible technology, so “3G GSM” is actually a CDMA technology, called WCDMA (wideband CDMA) or UMTS (Universal Mobile Telephone System). WCDMA requires wider channels than older CDMA systems, as the name implies, but it has more data capacity.
Since its inception, GSM has had many more add-ons and evolutions than CDMA. As I mentioned above, WCDMA is considered the 3G version of GSM technology. To further speed things up, the 3GPP (the GSM governing body) released extensions called HSPA, which have sped GSM networks up to as fast as 42Mbps, at least in theory.
Our CDMA networks, meanwhile, are stuck at 3.6Mbps. While faster CDMA technologies exist, U.S. carriers chose not to install them and have instead turned to 4G LTE to be more compatible with global standards.
The Future is LTE
The problem is, they’re turning it on in different frequency bands, with different 3G backup systems, and even, in Clearwire’s case, using an LTE variant (TD-LTE) that doesn’t work with any other U.S. carrier’s phones.
Furthermore, it’s not like the 2G and 3G networks are going away any time soon. Carriers have told us they’re leaving their UMTS and EVDO networks live until at least 2020. So we will not enter a European-style paradise of interchangeable phones anytime soon.
So what does all of this mean for you? If you want to switch phones often, use your phone in Europe, or use imported phones, go with GSM. Otherwise, pick your carrier based on coverage and call quality in your area. Our Readers’ Choice and Fastest Mobile Networks awards are a great place to start.